Where to run power cable

[HickRm]

Starting to think i want my old peugeot 206 back I had less issues than my stilo (even though it was battered lol) but hey the car is getting there. Anyway I cant find a gommet or a hole anywhere in the engine bay to run my 4 gauge power wire through.

I have the 1.6 aircon addition if that helps and have completely removed the glove boxes but there isnt one behind there and I cant run it down the wing, Anyone know where one is that I can actually get to?

 

[Eklipze3k]

This might help - https://www.fiatforum.com/stilo-guides/43905-amp-wire-1-6-how-i-did.html

 

[volxstu]

There is a huge grommet behind the A pillar on the Passenger side.


I then drilled a hole in the scuttle panel and took it to the battery through there. The cable can be put in another grommet and held in place where the oe wires go through a little hole just past the scuttle panel.

 

[HickRm]

thanks for the replies I know what my job is this weekend then so hoping it doesn't rain. for changed the speakers in the front is it best to get the adapters for new speakers and then use a wood baffle or just start from scratch with a wood baffle as a base?

 

[volxstu]

Make a wooden baffle and only use a wooden baffle. Are you using a Router? If you are you should be able to copy the shape of the base of the orginal pods and make it up from there.

 

[HickRm]

i found an ebay seller that sells wood ring so was going to use them

 

[volxstu]

you would probably need 2 18mm rings but the base is a specific non circular shape.

 

[Stilo man]

There is a grommet behind the glovebox and behind the foam. That's where I run mine.