Technical wheels?
- Thread starter allyl90
- Start date
-
- Tags
- panda 750 weller wheels
Currently reading:
Technical wheels?
I need some of those, my white mangels are only held in by 4 threads on each bolt 
If I can I'll send them to you if you want
I will ask in my post office next week.
I paid them 1.5e/pcs,brand new.
I will ask in my post office next week.
I paid them 1.5e/pcs,brand new.
Last edited:
Well I was expecting to look miles back for this thread, but here it is right at the top.
I bought some more wheels in the week, just because you can never have too many. Truth is they were quite nice, with decent tyres and seemed like a bargain. And they were, a little bit of curbing but no worse than most. They also drive nice with no wobble or shake, at last! I've fitted them to the 750L and it's the first time I've had a set of alloys on it that haven't felt like I need the wheels balancing.
Previous owner had them on a Cinq, with different size tyres front to rear.
Fronts are 175/60/13's, rears 165/70/13's, so it has a bit of a nose down stance which I don't mind. Will look better when the suspension gets lowered too.
Here's a couple of pictures for future reference of the diameters. The blue CLX has 175/70/13's, which is what the 750 had previously.
I bought some more wheels in the week, just because you can never have too many
. Truth is they were quite nice, with decent tyres and seemed like a bargain. And they were, a little bit of curbing but no worse than most. They also drive nice with no wobble or shake, at last! I've fitted them to the 750L and it's the first time I've had a set of alloys on it that haven't felt like I need the wheels balancing.Previous owner had them on a Cinq, with different size tyres front to rear.
Fronts are 175/60/13's, rears 165/70/13's, so it has a bit of a nose down stance which I don't mind. Will look better when the suspension gets lowered too.
Here's a couple of pictures for future reference of the diameters. The blue CLX has 175/70/13's, which is what the 750 had previously.
this is where I got mine for scruffbag. Cheap, nice and dead quickI need some of those, my white mangels are only held in by 4 threads on each bolt
http://rallynuts.com/motorsport/Whe...lts_Metric_M12_x_1.25mm_BZP_60°Taper_3030.asp
