General What spare whhel

[allan jenkins]

Ill be driving my 1.9 multyjet diesel with its 17" wheels into europe next week but i dont have a spare wheel..

So what wheels fit my bravo so i can go to the scrappy and get one?

 

[neilshep]

Ill be driving my 1.9 multyjet diesel with its 17" wheels into europe next week but i dont have a spare wheel..

So what wheels fit my bravo so i can go to the scrappy and get one?

The 16" steels of an Active will fit perfectly, and go in the spare wheel well, after you remove the plastic insert. Anything wider will not allow the boot carpet to sit down properly.

 

[Matthewr1990]

Yeh the spare in mine is thinner than my usual wheels but it does have the spare wheel kit inside it. I would be surprised if any standard Fiat wheel wouldn't fit

A Google for a 16" spare wheel with 4x98 stud patterns and 58.1 centre bore would bring a fair few up I can imagine. It's Fiats Standard size so there will be thousands.

 

[allan jenkins]

Yeh the spare in mine is thinner than my usual wheels but it does have the spare wheel kit inside it. I would be surprised if any standard Fiat wheel wouldn't fit

A Google for a 16" spare wheel with 4x98 stud patterns and 58.1 centre bore would bring a fair few up I can imagine. It's Fiats Standard size so there will be thousands.

cheers guys, i found this on a site.. quite a few cars have same pattern

http://www.minitorque.com/forum/f845/car-stud-patterns-18327/

4X98
ALFA ROMEO 33 86-96 4X98 35-42 58.1
ALFA ROMEO 145 94-01 4X98 35-42 58.1
ALFA ROMEO 146 94-01 4X98 35-42 58.1
ALFA ROMEO 155 94-98 4X98 35-42 58.1
ALFA ROMEO 164 4 Stud 88-98 4X98 35-42 58.1
FIAT BARCHETTA 95> 4X98 35-42 58.1
FIAT BRAVO 96-01 4X98 35-42 58.1
FIAT BRAVA 96-01 4X98 35-42 58.1
FIAT CINQUENCENTO 4X98 30-38 58
FIAT COUPE 16V 95-01 4X98 35-42 58.1
FIAT DOBLO 01> 4X98 35-42 58.1
FIAT FLORINO 95-00 4X98 35-42 58.1
FIAT IDEA 03> 4X98 35-42 58.1
FIAT MAREA 96> 4X98 35-42 58.1
FIAT MULTIPLA 99> 4X98 25-38 58.1
FIAT PANDA 03> 4X98 30-38 58.1
FIAT PUNTO I 94-00 4X98 35-42 58.1
FIAT PUNTO II 94-00 4X98 35-42 58.1
FIAT STILO 01> 4X98 35-42 58.1
FIAT TIPO 88-95 4X98 35-42 58.1
FIAT TEMPRA 88-95 4X98 35-42 58.1
FIAT UNO 85-95 4X98 35-42 58.1
FIAT UNO TURBO 85-95 4X98 35-42 58.1
LADA NIVA 4X98 35-38 58.5
LADA SAMARA 4X98 35-38 58.5
SEAT IBIZA 85-93 4X98 35-45 58.1
SEAT MALAGA 85-93 4X98 35-45 58.1

 

[Matthewr1990]

cheers guys, i found this on a site.. quite a few cars have same pattern

http://www.minitorque.com/forum/f845/car-stud-patterns-18327/

4X98
ALFA ROMEO 33 86-96 4X98 35-42 58.1
ALFA ROMEO 145 94-01 4X98 35-42 58.1
ALFA ROMEO 146 94-01 4X98 35-42 58.1
ALFA ROMEO 155 94-98 4X98 35-42 58.1
ALFA ROMEO 164 4 Stud 88-98 4X98 35-42 58.1
FIAT BARCHETTA 95> 4X98 35-42 58.1
FIAT BRAVO 96-01 4X98 35-42 58.1
FIAT BRAVA 96-01 4X98 35-42 58.1
FIAT CINQUENCENTO 4X98 30-38 58
FIAT COUPE 16V 95-01 4X98 35-42 58.1
FIAT DOBLO 01> 4X98 35-42 58.1
FIAT FLORINO 95-00 4X98 35-42 58.1
FIAT IDEA 03> 4X98 35-42 58.1
FIAT MAREA 96> 4X98 35-42 58.1
FIAT MULTIPLA 99> 4X98 25-38 58.1
FIAT PANDA 03> 4X98 30-38 58.1
FIAT PUNTO I 94-00 4X98 35-42 58.1
FIAT PUNTO II 94-00 4X98 35-42 58.1
FIAT STILO 01> 4X98 35-42 58.1
FIAT TIPO 88-95 4X98 35-42 58.1
FIAT TEMPRA 88-95 4X98 35-42 58.1
FIAT UNO 85-95 4X98 35-42 58.1
FIAT UNO TURBO 85-95 4X98 35-42 58.1
LADA NIVA 4X98 35-38 58.5
LADA SAMARA 4X98 35-38 58.5
SEAT IBIZA 85-93 4X98 35-45 58.1
SEAT MALAGA 85-93 4X98 35-45 58.1

Yeh 4x98 wi 58.1 centre bore. Is what nearly all fiats use, including the new 500's etc. the only exceptions I know is the fist 500 Abarth, which has a centre bore of 58mm bang on. And the grande Punto, which use a 4x100 stud but that's because the grande Punto is basically a Vauxhall Corsa with a fiat shell.