DeanF
New member
Stilo 1.9 Jtd 2003
Reason i ask is that i am Still getting the Beep, Beep, Beep & engine failure error & it sems to happen on light throttle up hill 3rd & 4th Etc whilst loading the engine !! Especially if it is quite cold outside also 2 to 3 deg !!
It does not always do it though, & if it were down to leaks Etc, I would expect it to do it all the time , As a split is a split Etc & generally does not change.
Are these symptons in any way connected with the Update ??
I have relocated the Overboost, Dried it out & checked all hoses, Replaced a couple of jubilee clips on boost/intercooler hoses that were not super tight.
The car has an Angel Tuning remap. I think i am going to have to Bite the Bullet & get the fault coeds read
Any ideas before i pull out what little hair i have left !!
Cheers
Dean
Link to original post https://www.fiatforum.com/stilo-technical/125934-boost-cut-under-load-engine-failure-error.html
Reason i ask is that i am Still getting the Beep, Beep, Beep & engine failure error & it sems to happen on light throttle up hill 3rd & 4th Etc whilst loading the engine !! Especially if it is quite cold outside also 2 to 3 deg !!
It does not always do it though, & if it were down to leaks Etc, I would expect it to do it all the time , As a split is a split Etc & generally does not change.
Are these symptons in any way connected with the Update ??
I have relocated the Overboost, Dried it out & checked all hoses, Replaced a couple of jubilee clips on boost/intercooler hoses that were not super tight.
The car has an Angel Tuning remap. I think i am going to have to Bite the Bullet & get the fault coeds read
Any ideas before i pull out what little hair i have left !!
Cheers
Dean
Link to original post https://www.fiatforum.com/stilo-technical/125934-boost-cut-under-load-engine-failure-error.html