Technical Vibration on overrun

Currently reading:
Technical Vibration on overrun

Arancia

Member
Joined
Apr 15, 2020
Messages
66
Points
72
Afternoon all
Well after 4 years Arancia has completed around 50 miles after a full rebuild.
I still need to get the suspension properly set up (any recommendations in Warwickshire?) but, whilst it seems to run ok there is a very noticeable deep sounding and feeling vibration on overrun - I.e. when I take my foot off the accelerator when it is in gear or in neutral. Engine has been fully rebuilt, original non synchro gearbox inspected (looked ok) and re installed. I did take the diff apart and put it back together - hopefully correctly!
Any thoughts before I crawl into underneath again?
Many thanks
And this is what it looks like now….
 

Attachments

  • E561F0E4-35B1-4A98-B17E-72F9A1BBB6EC.jpeg
    E561F0E4-35B1-4A98-B17E-72F9A1BBB6EC.jpeg
    4 MB · Views: 66
  • 8871FCF7-A507-41D0-92BF-A21948CF174F.jpeg
    8871FCF7-A507-41D0-92BF-A21948CF174F.jpeg
    477.1 KB · Views: 35
  • C64BD999-BCE9-4606-8F35-246A5B8BFD80.jpeg
    C64BD999-BCE9-4606-8F35-246A5B8BFD80.jpeg
    3.8 MB · Views: 186
Back
Top