General ulysse gearbox/clutch mount

Currently reading:
General ulysse gearbox/clutch mount

robclarke

New member
Joined
Dec 6, 2010
Messages
10
Points
3
Location
Nelson Lancashire
hi guys i've got a 98 ulysse 2.0i EL, whilst driving home last night i lost all gears and clutch, called green flag towed home after recovery chap reckoned gearbox had gone, on inspection this morning i notice that a bolt had been sheared off the top right hand engine mount on the section which connects into the housing itself, i'm currently going to get a bolt extractor to remove the rest of the bolt from i think is the clutch housing,

question is though could someone tell me what size bolt these are i took it to my local car shop and he was dumber than dumb and did not know himself
thanks in advance for any replies
cheers Rob
 
are you sure? sounds more like the infamous ulysse gear cable popping off the selector arm to me. can you move the gear lever onto all the normal positions or does it simply move forward and back? if so see my other threads.
 
hi yeah defo sure the mounting point on the engine has sheared off only fault being i'm not too sure of the section i need to replace on the engine itself i've got a picture of the housing i need

384857_2596002332663_1032842599_2797950_1458752210_n.jpg


Could you tell me which part this is below the clutch cable guide please
 
Back
Top