Ulysse Ulysse 2.0Ltr diesel year 2005

[jack54]

Hi everyone I'm new to any kind of Internet forum, after reading through the posts on this site I can see there is many very informed people posting helpful information on many topics to do with the Fiat family of vehicles I have just acquired a 2.0Ltr diesel Ulysse 2005 and would be grateful of someone could help me, Problum, the hard plastic pipe coming from the inlet of the turbo has a smaller branch pipe off of it and mine is just left open ended were should this go too, I'm waiting on a workshop manual and thought someone could help thanks for any help that members could give regards jack54

 

[FRANTIC FRAN]

There are many vacuum pipes, can you send a photo?

Some are open with valves so you can test the vacuum.

 

[jack54]

Its the branch pipe from the hard plastic pipe that connects to the air intake, it's about 3/4inch in dia and the only branch, when i say left open it's just that and no valve or anything thanks for reading hope you can help

 

[jack54]

Can anyone post a picture of the Ulysse that shows the engine bay with a good shot of the pipework on the near side much appreciated if this can be done thanks for reading

 

[FRANTIC FRAN]

That will be the intercooler pipe, I think I know the one you mean.

On some engines (mainly 2.0d) there us no extra small pipe on the plastic housing. On the 2.2 there is! Maybe someone has replaced it with the wrong part. See the 2 links below for differences.

http://eper.fiatforum.com/eper/navi...INT_MODE=0&EPER_CAT=SP&GUI_LANG=3&WINDOW_ID=1

http://eper.fiatforum.com/eper/navi...INT_MODE=0&EPER_CAT=SP&GUI_LANG=3&WINDOW_ID=1

 

[jack54]

Thanks for all the help. It is a 2.0ltr and the person i bought the vehicle from said he replaced the pipe. So prob is the wrong one