Torx bit

[scottmetro]

Hi,

Has anyone got a torx bit/screwdriver for the Bravo MAF sensor i couldhave/borrow (i will return) just to get the screw off my MAF sensor to clean it.

alt does anyone know where i can get one quick, ive been to hellfrauds but they only come in kits aparently
only need it for a 5 min job

thanks

Scott

 

[AlfaNige]

You can get them out by cutting a slot across the top with a hacksaw. dont cut all the way in, just enough to enable a good grip with a flat blade screwdriver.
If you want the tools, then go to your local market and pick them up for a £5er but beware, count the star points, as some are 5 star and some are 6 and dont forget they are security ones - i.e. have a hole in the middle!

 

[gary]

i've got a kit if you are near dartford or try you local brown brothers or partco motor factors.

 

[Pete McK]

Maplins or similar sell kits with all the bits in, they're not expensive. Try your local motor factors, too.