Technical stilo abarth locking

Currently reading:
Technical stilo abarth locking

mmarkcooper

New member
Joined
Oct 7, 2005
Messages
33
Points
12
Location
blackburn
hi can anyone help me plz ive recently had a new passenger door motor fitted because ever time i try and open the locking the drivers opens but the passenger still does not work first time is this nomal or do i have to change any settings in my car
 
activematt said:
you have to push the open button twice to open both driver and passenger door.............i think thats the question you were asking, sorry if its not
hi is it possible to alter the setting so that the passenger opens the same time as the drivers
 
mmarkcooper said:
hi is it possible to alter the setting so that the passenger opens the same time as the drivers



Yes it sounds as though you have your car setup with the independant locking feature, go in to the setup menu on the CN+, you will see a list, on the list there will be a menu for locking status go in & uncheck the check box.(y)
 
Even if you don't have CN+ you can still change the option to unlock only the driver's door when you press the unlock button on the remote. Check the user manual that came with your car (if you have one). (y)
 
Hi my car has options, under menu/my car set up "drvr lock on:eek:ff" / "Speedlock on:eek:ff" / "Ind Boot on:eek:ff"

If the drvr lock is set to "ON" then when you go to open the door using your fob, it'll only open the drivers door (Known as the "london feature" to stop people jumping into your cars passenger side when you unlock your car). Switched off it'll open everything.

If Ind Boot is "ON" the boot will NOT open until you use the "boot" button on your fob (twice quickly for glass lid / Finger kept on for full boot lid!)

Speedlock will lck the doors automatically when you set off over about 15Mph.

The chances are when you had your passenger door replaced. They will have disconnected the battery, reseting the my car setup - Yours by default will probably have the drivers door lock set to "ON" as mine did.
hope this helps, if not, i tried :p
 
Back
Top