Technical Stilo Abarth 2.4 Clutch

[Rayv]

My Stilo Hydraulic clutch failed (lost pressure) at about 64 000 Km. I replaced the master cylinder with Fiat OEM part. The clutch was fine for 3 months but is now starting to loose pressure again. Bleeding help for about 3 days. There is no leaks in the system at all. No fluid loss.
It was sugested from a Fiat dealer to change the slave cylinder as well.
This smell like big money.
I am thinking of doing this project on my own, but would apreciate all expert advice and perhaps workshop manual information.
Please advice.
Thanks

Ray

 

[Rayv]

My Stilo Hydraulic clutch failed (lost pressure) at about 64 000 Km. I replaced the master cylinder with Fiat OEM part. The clutch was fine for 3 months but is now starting to loose pressure again. Bleeding help for about 3 days. There is no leaks in the system at all. No fluid loss.
It was sugested from a Fiat dealer to change the slave cylinder as well.
This smell like big money.
I am thinking of doing this project on my own, but would apreciate all expert advice and perhaps workshop manual information.
Please advice.
Thanks

Ray

Schematic drawing of the assembly from driveshaft and gearbox and slave cylinder would be first price!!

Please if there is anyone that have experiance in this matter please advice.

 

[PNL]

https://www.fiatforum.com/stilo/208...lt-engadge-gears-reverse-near-impossible.html

The 2.4 also uses one [concetric slave ]and could be the source of the loss of pressure..

 

[Rayv]

Many thanks! Will check it out