General Starter Motor Problem still
- Thread starter Robbie62
- Start date
Currently reading:
General Starter Motor Problem still
Bernievarian
Prominent member
- Joined
- Jan 15, 2017
- Messages
- 2,993
- Points
- 655
Should be the 2nd one, without LPG ... to confirm, need to know what is your VIN ...
BRs, Bernie
If someone here helped You fix -or better, understand- your issue, hit the thanks icon @ bottom right corner, it's free and makes us feel helpy ;-)
Attachments
The sticker on mine says 55193356.
Hitachi made in China!!!
Bernievarian
Prominent member
- Joined
- Jan 15, 2017
- Messages
- 2,993
- Points
- 655
Matches with what I said, Hitachi(na) indeed ;-)
oldmanhouse
Member
In my eper, I am seeing part number 55193356 which has been replaced by
51890631
looking at aftermarket equivalents for both those part numbers yields starters with varying numbers of teeth. Some have 8, 9, some are 10. Not sure how important that is. Presumably you need one with the "correct" amount for your flywheel
51890631
looking at aftermarket equivalents for both those part numbers yields starters with varying numbers of teeth. Some have 8, 9, some are 10. Not sure how important that is. Presumably you need one with the "correct" amount for your flywheel
Last edited:
Bernievarian
Prominent member
- Joined
- Jan 15, 2017
- Messages
- 2,993
- Points
- 655
It IS indeed very important !
- more teeth than needed: you won't be able to install it (actually you could but it wouldn't engage)
- less teeth than needed: you might install it but it would self-destroy itself and even the flywheel by grinding effect.
Why I asked for the VIN, so ePer would give us the correct PN ...
BRs, Bernie
If someone here helped You fix -or better, understand- your issue, hit the thanks icon @ bottom right corner, it's free and makes us feel helpy ;-)
Last edited:
Is the VIN ZFA19900001435375 I can't locate the engine number I've just been underneath and the new one fitted is RTX part No 402650542 does anyone know if this is the right one. How do I know how many teeth it is supposed to have?
Robbie62 hacked off
Robbie62 hacked off
Because I have had a new one fitted and it might be the wrong one because it hasn't stopped the crunching sound when it is started but only once or twice. The flywheel has been checked and is ok, so now I am trying to find the correct starter. I even tried ebaying a hitachi 55193356 starter and when I did a fit check it said it doesn't fit so I am totally confused now
I've just checked and the starter I have had fitted should be ok but as I say it has not cured the problem of intermtant crunching when starting. The next stop is to have the electrics checked by someone who knows what they are talking about. But why would it start perfect 9 times out 10 and if the flywheel is damaged how does the starter manage to engage and turn it to a sweet spot next start. According to a respected garage the fly wheel is not damaged by the way.
Robbie62
Robbie62
