Technical spedo not working

Currently reading:
Technical spedo not working

stevendawes

New member
Joined
Aug 29, 2023
Messages
4
Points
26
Location
london
hi people newbie here
i have a fiat 500 1.2 2018 lounge the Speedo has stopped working just wanted to know where is the spedo sensor located and has any one fixed this problem and what would the part number be for the Speedo sensor thanks in advance
 
hi people newbie here
i have a fiat 500 1.2 2018 lounge the Speedo has stopped working just wanted to know where is the spedo sensor located and has any one fixed this problem and what would the part number be for the Speedo sensor thanks in advance
There is no speed sensor it gets the speed reading from the abs system/ECU



Does the Speedo read at all?
Does it show zero or samtay in the off position?
 
There is no speed sensor it gets the speed reading from the abs system/ECU



Does the Speedo read at all?
Does it show zero or samtay in the off position?
No it was working abruptly but now stopped i have done a fault code check and it is clean
 
If the entire speedo cluster is dead (no lights, coolant, fuel or anything) then that's a different problem to the speedometer shows "0" when the car is moving.

The speedo' works via a stepper motor on the back, and stepper motors can fail even though it's quite rare. A speedo' fixing place can put a new one on for you... but if you're handy with a soldering iron then you could try to track down a new one and fit it yourself. For the hassle involved I'd be inclined to send it to a pro'.


Ralf S.
 
No it dont move on start up but some times it will bounce of 0 when the ignition goes on and i now it will work and times it wont move at all
 
Back
Top