Technical Setting interval for next oil change ? Fiat Ducato 2013 3,0 Multijet facelift

[Roger from Norway]

Hello.
I have just purchased the Iphone full version of Multiecuscan with the OBDLink MX+ and yellow cable,
and used it to reset "Oil change (only for versions with DPF".
But my car display shows "Change oil 0 km". Anyone know how to set a new km. level. ?
It looks as if the change oil reset works. And sometimes when I start the car afterwords, the Change Oil, dissapear.
But the next time I start the car it comes back.
I have tried almost every way bay pressing the throttle, 7 times, or 3 times, from treads i found on-line.
But nothing seems to work.
Oil degradation level is 100% = reset. And Distance to next Oil change read from the ECU is 45000 km

The display continues to show 0 km to nest oil change
Anyone ?

 

[AsdaPricey]

Hello @Roger from Norway

According to post #2 in this Thread on here the oil service reset is separate to the oil degradation reset for DPF vehicles….

 

[Roger from Norway]

Hello @Roger from Norway

According to post #2 in this Thread on here the oil service reset is separate to the oil degradation reset for DPF vehicles….

That is correct. I'm resetting the Oil Service in the ECU. Separate from the different settings in the Service meny.
This thread explanins some part of my problem. The Oil reset function seems to work. Because if I do this,
the Chang Oil warning has dissapeared the first time when i turn on the ignition and starts up after reset.
But if I stop. Don matter if it is right away or after 1/2 hour drive, and turn the ignition back on, the warning is back.

The oil degradation level is 100%, as I have read is equal to just changed. So i suppose that is reset.
But the mileage counter stays at zero km to change. Wery strange.
Maybe the Multiecuscan with bluetooth doesent cover that part of the reset, and I have to buy another reset tool. ?

 

[Dmitry Shvedov]

You have to do oil life reset procedure in two different ECU. ECM and IPC. Separately.

 

[Roger from Norway]

Dmitry.
Yes i have reset both the one under the Service menue where I need to use the yellow cable. And the one in the ecu which resets the degradation. It shows 100%. I have to day also tried an Icarsoft CR Max.
It had an menue point for setting the next oil change odometer. But it just gave me an error code. Talked to the dealer of the instrument and he says that then it does not manage that function. So he just told me to return the tester.

 

[deejays]

You need to do the following:

and then:

 

[Roger from Norway]

deejays: I tried again. Did exactly what you wrote
I have X250 FL. And uses Multiecuscan on the IPhone.
Goes in to service mode with yellow cable. Run Service Interval Reset. Get «Completed».
Then do the «next km service reset». Value 25000 km. Got «completed». Ignition of. Ignition On, and starts the wheicle. It instantly shows «Change Oil».
And the Odometer still reads «Change oil 0 km» under the service menue. Sorry. I think I have tried the most combinations.