Technical Searching for part numbers or sizes.

[bob45]

Looking for some tech imfo please. This week I decided to change the Control Arms, Wishbones on my Fiat Panda 1.2 2013 Pop.
So I ordered the arms and, managed to find the matching replacement bolts too.
After watching you tube vids and feeling confident of a quick job I started in, this morning.
Only to find that the Bumper and front crash strut need to be removed, and I would like to replace these fasteners cos they are very badly corroded. Also the bar running verticlly and the 4 bolts hiding the control arm bush.
So 4 front bolts behind bumper. 4 bolts hiding bush. and 2 bolts on vertical strut ( dont know the names)
Can any one point me to these bolt sizes or exploded part diagrams that include the fasteners. Looking to buy from a bolt wholsaler to keep costs down. Can anyone help, please?

 

[Panda IIs]

Looking for some tech imfo please. This week I decided to change the Control Arms, Wishbones on my Fiat Panda 1.2 2013 Pop.
So I ordered the arms and, managed to find the matching replacement bolts too.
After watching you tube vids and feeling confident of a quick job I started in, this morning.
Only to find that the Bumper and front crash strut need to be removed, and I would like to replace these fasteners cos they are very badly corroded. Also the bar running verticlly and the 4 bolts hiding the control arm bush.
So 4 front bolts behind bumper. 4 bolts hiding bush. and 2 bolts on vertical strut ( dont know the names)
Can any one point me to these bolt sizes or exploded part diagrams that include the fasteners. Looking to buy from a bolt wholsaler to keep costs down. Can anyone help, please?

So maybe you didn't watch the right (Fiat specific) videos? The 500 gets more coverage and there is a good one on YouTube with a guy doing this job in the rain on his drive with his cat. Anyway none of that is helpful.

You can use ePER in the ribbon at the top of this site; here is a link for suspension arms/bushes it provides the part numbers; https://eper.fiatforum.com/en/Drawings/Detail/F/F/GIN/33/443/1/10/0/SubSubGroup You will need to find the separate parts for the crash bar (which only needs to be loosened not removed in my experience and the subframe brace.