General Retrofit LCD Instrument Cluster

[grun500]

I have 2008 1.2 lounge and fitted newest type cluster. It functions normal, only downside is that you need a laptop with MES software to adjust date and time.

 

[teka2]

That's good. Because I watch some video and was information the tpms will not work and hill assist. So I can buy any of cluster, then send them to person who can change milage to 0 and with MES change to my milage ? As I can't finde any with less than 40k milage on the dash.

 

[grun500]

Regarding tpms and hill assist, I can’t say anything, as our 500 doesn’t have those

 

[teka2]

Regarding tpms and hill assist, I can’t say anything, as our 500 doesn’t have those

It's not a proper one hill assist. Just hold car for around 1-2 seconds if detected car is on hill. And tpms just informing when is lower pressure, I think is reading data from abs sensor or something like that. So finally, I can fit any facelift cluster ? Or must come from manual 1.2 petrol ? As I found one from diesel with low milage and one from 0.9 twin air. And I think one of them had automatic gearbox.

 

[grun500]

Gearbox, engine type doesn’t matter you can adjust all those things in the basic settings