Removing heaterfan-control-knob and windscreenwipers

[Jepson75]

...what You would like to call it (don´t know the english word for it). I think it´s in a-not well-working-condition.
The heaterfan runs at full speed or no speed...no matter if it´s on level "0" o "4"! Do I need to remove the entire dashboard?? Or can anyone help me with any ideas!
Is the fan-control a single part or is it an all-together-part with the heatercontrol and the air-control??

More: Windscreenwipers stops, when I put them at full speed! Any ideas for that problem!

It´s a -96 Bravo HGT

Besides...is there a Bravo version with the 20v turbo engine???

 

[Anonymous]

I know that on my 1.8 the fan is underneath the glove box - there's one screw then it 'twist's out

 

[BlackBravo]

the speed knob pulls of,
it is on very well

 

[Sven]

If you have air con, you must take of the center dash off and take a look at the potentiometer that controls the fan speed.
The second thing to look is the reostat, its a kind of resistor that controls the fan speed. It is located left of the heater went in the car and its held by two screws.

The wipers could be the relay is broken, but not sure.

Members Site - - - - - - - My Site