alfistiUK
New member
- Joined
- Feb 3, 2011
- Messages
- 41
- Points
- 15
Hi,
I'm getting slight cross contamination between tail lights and indicators on both rear lights.
I have eliminated the lamp units (by removing them) and the plastic plugs and the earth is perfect.
Putting a multimeter on the plug supply wires shows that the problem must be further back/ supply- electronic module???
TESTING ON OFFSIDE=
With brake on -Green/yellow wire (brake wire) ONLY 6.7v
Lights on- Yellow/black (tail light wire) 11.7V and green/yellow wire 6v
Indicator on- Blue wire (indic wire) 11.79v AND green yellow wire 5.7v- WHICH MUST BE INCORRECT.
Car battery is good- no problem starting up etc, and test results the same with engine running.
Any ideas?
Many thanks,
John
I'm getting slight cross contamination between tail lights and indicators on both rear lights.
I have eliminated the lamp units (by removing them) and the plastic plugs and the earth is perfect.
Putting a multimeter on the plug supply wires shows that the problem must be further back/ supply- electronic module???
TESTING ON OFFSIDE=
With brake on -Green/yellow wire (brake wire) ONLY 6.7v
Lights on- Yellow/black (tail light wire) 11.7V and green/yellow wire 6v
Indicator on- Blue wire (indic wire) 11.79v AND green yellow wire 5.7v- WHICH MUST BE INCORRECT.
Car battery is good- no problem starting up etc, and test results the same with engine running.
Any ideas?
Many thanks,
John