OP
OP
re profiled cams
- Thread starter tim1989
- Start date
Currently reading:
re profiled cams
do it your self, go rent a garage off the council
OP
OP
Wouldnt no where to start
i can take it apart but thats as far as it goes. Might just have to give it to torque and reddot
putting it back together is just the reverse of taking it apart
why wouldn't he be able to get it remapped again?
I'm not sure that it was re-mapped in the first place!
it was a few times iirc, thought its only the panda 100 and its clones that have locked ecu's
This. Would need fiddlin' with the ecu to get to work mind you
http://www.ebay.co.uk/itm/Alfa-Romeo-156-2002-1-8-Throttle-Body-0280750102-/380273846221?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item588a1667cd#ht_1696wt_1140
This post contains affiliate links which may earn a commission at no additional cost to you.
we would need to know what pin does what on both throttle bodies, anyone any ideas?
This post contains affiliate links which may earn a commission at no additional cost to you.
It has the same plug as the standard 1.2 tb
ah cool, all the pins go to the right bits inside then? i think the 1.4 punto has same tb as the 1.2, grande don't that has a plastic one with different plug
I'll double check tomorrow but last time I checked for myself, was getting a bigger tb for my 1.2, found the Alfa one looked similar and it plugged in no problems Didn't get it mind you...
Didn't get it mind you...
OP
OP
any news?I'll double check tomorrow but last time I checked for myself, was getting a bigger tb for my 1.2, found the Alfa one looked similar and it plugged in no problems
This post contains affiliate links which may earn a commission at no additional cost to you.
Sorry have been busy, couldn't get near a computer! Got a 1.2 tb I had lying about, brought it to the yard and tested it. Fits perfect The tb is from a 1.2 Bravo and the car was a 01 Alfa 156, engine either a 1.6 or 1.8
You might have to get an adapter to fit it to your manifold, it is a far bigger tb
The tb is from a 1.2 Bravo and the car was a 01 Alfa 156, engine either a 1.6 or 1.8 You might have to get an adapter to fit it to your manifold, it is a far bigger tb
OP
OP
On her way to reddot/torque iv got the alfa tb now aswell:devil:
iv got the alfa tb now aswell:devil:
OP
OP
Turns out my timing belt did snap so new vavles ect going in aswell and should have it back by monday:slayer:
so new vavles ect going in aswell and should have it back by monday:slayer:
Turns out my timing belt did snap
how you only just noticed if you and Leigh stripped it all off ages ago
OP
OP
We just cut it and left it Must of been around the back where we couldnt see
but it would have been all loose an not needed cutting
OP
OP
Couldnt get it of even after cutting it
You sure torque dont think your cut is a break?
