General Question
- Thread starter Kazoku
- Start date
Currently reading:
General Question
Hello,
Looking over the internet with the number on the plastic part I've came accross this thread:
www.fiatforum.com
Looking over the internet with the number on the plastic part I've came accross this thread:
Crank case pressure (failed PCV?) | FIAT Panda (2012+)
I have a 2019 Panda 4x4 TwinAir with 14300 miles on the clock. I have a problem with crank case compression (see video). Is this simply a failed crank case breather valve problem (PCV)? does anyone know the part number for the valve or is there a delete available?
www.fiatforum.com
It's the end part of the item in this photo from another post, part of the crankcase breather, apparently. The actual part number is 55246908 and you can see it in full in the photo below
www.fiatforum.com
(Note this link goes direct to the photo, rather than the link in the post above which starts you at the top of the thread)
Also, you can see the part in isolation in this ebay post: https://www.ebay.co.uk/itm/125472491492
Crank case pressure (failed PCV?) | FIAT Panda (2012+)
I have a 2019 Panda 4x4 TwinAir with 14300 miles on the clock. I have a problem with crank case compression (see video). Is this simply a failed crank case breather valve problem (PCV)? does anyone know the part number for the valve or is there a delete available?
www.fiatforum.com
Also, you can see the part in isolation in this ebay post: https://www.ebay.co.uk/itm/125472491492
Last edited:
This post contains affiliate links which may earn a commission at no additional cost to you.
