Technical Plenum Chamber

[fordy]

hi guys

once again i have gone down the 40mm TB route on the 1.1 and i dont want to do the corsa plenum / "bob that sits on tony" lol
at the mo is has the std air box with the front cut off and a heat shield under it but i want better. does anyone do a bigger plenum than the 899cc cinq one? or will i have to do corsa again?

thanks

 

[Brooky]

make one.well if you can use a welder

 

[fordy]

i cant and where the hell would you get the material from?
i mean it cant be easy to drop on the correct size stainless easily and cheaply can it?

 

[Brooky]

lol. well you could use ally or stainless sheet,roll it into the correct dia.weld it down the seam,weld a lid on,drill a hole in the side and weld a big tube onto the side.then dill the holes in the lid accordingly.

You could use steel and paint it but ally or stainless is bling bling

I think i may do this sometime soon.

Finding tubing in the the correct dia. but in a thin enough gauge would be prity hard i recon.

All depends if you have the facilities at home or work i have half at home and all at work so im alright