Please Please HELP!!

[Josh]

my bravo started making a funny knocking sound last night from the wheel so crawled home slowly. Got back to find that two of the bolts on my alloys have completely snapped in half leaving half still in the hub. went to loosen one of the remaining bolts ans that sheared off as well. not only that but now i cant get the special bit on top of the locking wobble bolt.

GRRRR!!! does anyone know how i can removed the part of the bolt stuck in the hub?

 

[RR]

Drive very carefully to a garage!

 

[Owen]

drill them and use a screw extractor set. Never tried meself to drill wheel studs before though - they're probably impossible to drill..

Owen.

'99 Bravo GT TD100

 

[roland]

wheel studs

Yes they can be drilled but you need a brand name drill, preferably a small pilot then a 10mm. Also best to use a pillar drill

 

[Anonymous]

I definately can't drive it on only one bolt.
any ideas what type of drill bit would you recommend? any grease, oil that can help?

 

[stephen]

broken wheel nuts

you could find a crook who would remove your wheels in 5 minutes flat