Technical part number or where to get: gearbox input shaft bearing/oil seal

[mzhussein]

Info:
Mk 1 Punto 60 s-team
1.2 8v

as above my old punto (still going at 78k) being used a van till death by older bro, needs a new clutch, becasuse it got contaminated with gearbox oil. i now need the input shaft oil seal and bearing. anyone know where i can get these i DONT want the whole set as on ebay, cos thats too much money for bro (hes running it on a budget till he can afford a van and the rest of the seals are ok and i have a boxed new clutch kit still liying around) so does anyone know where to get them or can someone post up the part numbers from fiat?

 

[Davren]

Item 3, part number 40004670 is the seal (same for all models)

Item 2 is the bearing. M2, M3 and M7 are 1.2 engines, so part number 55208335.

Latest ePER I have is August 2009. It shows price for the seal £5.54 +VAT and £23.01 +VAT for the bearing.
-

 

[mzhussein]

excellent, thats perfect, thanks!

 

[ST60SX]

excellent, thats perfect, thanks!

The bearing is just a standard open 6204 bearing. Like this

£21 saved easily

 

[mzhussein]

do'h just a few hours late, i just picked them both up off fiat, they were sitting on the shelf

thanks anyways!

 

[ST60SX]

do'h just a few hours late, i just picked them both up off fiat, they were sitting on the shelf

thanks anyways!

Damn. I was going post this at lunch time but one of my minions broke something and I had to go and fix it.

Is the gearbox dismantled already? I found the old bearing particularly difficult to drift off the shaft so I used a ball-joint splitter under the edge of the bearing, using the case as a pivot, and smacked it. Seemed to work pretty well.

This guide gives a pretty good overview of the process. It's for a mk2 box but the process is the same for a mk1. Good luck!

 

[mzhussein]

thats fantastic, altho its going to a mechanic friend to be done "mates rates" just as long as we give him the parts...lol i wish i had seen this when i had the punto would have fixed it when i had the box out doing the clutch the first time round, i just didnt know what to do and was very time limited :/