Technical P0101, P0105, P0106 on 2006 1.4 Doblo

[parkingtonhatter]

Hello - Hoping someone might be able to offer some pointers.

Car initially took a few goes to get started from cold, but was okay starting from warm.

After a few days the engine light came on.

I disconnected the MAP sensor in order to get home from a trip away, and the car ran normally.

Ran the scanner and the above codes came up.

Bought a new MAP sensor and thought it was okay, but then the car lost power and I had to keep restarting. I’ve never experienced limp mode before, but it sounds like that was happening.

Thought that the sensor I ordered might be wrong, so I’ve ordered another one anyway, which I’ll test when it arrives.

When I start the engine with the sensor disconnected it starts but does smell strongly of petrol.

I had a service inc oil filter change last month after buying the car, and it says on the receipt that the air filter was also changed. I also had the end section of the exhaust replaced.

Can anyone offer any advice? I’m new to diagnosing problems, but good at fixing things once I know. Just need practice at the former!

I’m new on here, so apologies in advance if any newbie errors have occurred, but thank you so much to anyone with the patience to help me

 

[jackwhoo]

Look in 500 and panda sections for 1.2 engines , same engine but 1.2 rather than 1.4

 

[parkingtonhatter]

Thank you!