- Joined
- Jul 1, 2013
- Messages
- 27
- Points
- 10
Hi all. I've just put a brand new coil pack on my 1.6 2002 model multi. Before I fitted the coil pack my symptoms were not starting. Badly hesitation pulling away at junctions. So changed the coil pack and now get no problem starting but error code p0300. Would this be because the ecu has recognised a change in the ignition where I've fitted a new coil? I've reset the codes but haven't had a chance to go out for a drive. I use to get the engine management light come on when trying to start the car but now with the new coil I don't. Anyone had the same symptoms.
