My washing machine

Currently reading:
My washing machine

luvduvs

SNAP!
Joined
Oct 26, 2006
Messages
4,462
Points
858
Location
Sydney
Does anyone know why a washing machine could get stuck at a particular step? E.g. its happened twice - left the washing machine (non digital) washing and went to bed :)bang:), woke up like 8 hours later and the thing was stuck at the soaking step!

Hope I haven't done it any damage.. :(
 
Ours did the same thing. I think it was the program controller.

We had ours covered on an extended parts and labor warranty though

Tone
 
Our old one did this, it was the switch dial thing with the settings on. A little nudge and it finished the cycle.
 
mine did this, it was the pump propeller stuck, when the water filled it would stop the cycle, after i removed a bit of my GF's knickers from the pump all was well again.
 
it could be the machine is not emtying,if it does not emty then the spin cycle wont come on,check this if so then you would have to clear the pump
 
Does anyone know why a washing machine could get stuck at a particular step:(

If you take the top off you may find the rotary control has lost some of its actuating prongs`bits of plastic`
 
Back
Top