General My stilo abarth project car

Currently reading:
General My stilo abarth project car

It's one of the functions you can set with MES. You'll need the car's security code to do it.
.
 

Attachments

  • MES.JPG
    MES.JPG
    104.3 KB · Views: 65
Someone posted a few years ago that you could enable the hazard flashing by changing the alarm country mode. I don't remember which country or region you have to set it to though.

You can change the alarm country mode manually without MES. Instructions from the eLEARN workshop manual are below if you want to try all of them. Post which one it is if you succeed.
.
 

Attachments

  • Alarm Mode p1.JPG
    Alarm Mode p1.JPG
    130.3 KB · Views: 68
  • Alarm Mode p2.JPG
    Alarm Mode p2.JPG
    134.4 KB · Views: 56
Damn am away on a training course for work on 27th until 30th so don't think I can make it.any coming up later on in year?
 
Your car is looking very nice indeed :)

If you're still looking for an exhaust I would recommend having a talk to the guys at Powerflow. I took mine to the dealer in Leek, they made up a custom centre pipe and back box with a 2nd cat delete and single 2.5" tip for around £300 IIRC. Sounds much better and car is putting out around 180BHP with that and a BMC panel filter :)

I think you've inspired me to finally make a start on my alloy refurb :D
 
Got my bonnet bra fitted today and painted final wheel.now just need to get the plugs changed and oil flush in change oil and put oil treatment in and put 2gallon of fuel in with fuel cleaner/injector clean nearly there
 

Attachments

  • 1402353751962.jpg
    1402353751962.jpg
    91.1 KB · Views: 74
  • 1402353765135.jpg
    1402353765135.jpg
    50.1 KB · Views: 68
  • 1402353777764.jpg
    1402353777764.jpg
    49.9 KB · Views: 63
  • 1402353795059.jpg
    1402353795059.jpg
    94 KB · Views: 76
  • 1402353810626.jpg
    1402353810626.jpg
    97 KB · Views: 73
A didn't like them at first but they grew on me.
Yeah its getting the best of everything engine wise lol you gotta look after it
 
I have a small leak from gearbox bellhousing so put a Lucas treatment in hopefully it will help or its a gearbox out job as I think its the seal in input shaft (are they prone to go)
 
Back
Top