Seicento My '98 seicento 1242 8v.

Currently reading:
Seicento My '98 seicento 1242 8v.

itR

New member
Joined
Aug 16, 2009
Messages
7
Points
3
Location
Rethymno
This is my litle one.

Engine:
Punto (176A8.000).
Ecu from a '94 punto 1242 8v.
BMC/CDA air filter.
Fuel pump from a punto 1242 8v.
Intake/injectors from a punto 8v.
Ignition coil from punto 1242 8v.
Manifold is from Bexat (hand made) and the rest exhaust is 45mm.
Coll it.
Gear box with 4,071 diff.
Comperesion ratio 10.5/1
Weith redaction in crank shaft/flyweel.

Brakes frond:
257x20mm disks
57mm calipers all from Lancia Delta HPE.
Braces rear:
240x12mm (the fronds of cento's).
34mm calipers from Fiat Coupe 2.0-16v Turbo with custon spasers.

Rims/Tires:
5,5x14 speedline 38 offset.
Abarth 10mm spacers.
165/60-14.

Suspension:
Bilstein/eibach.

Interior:
Full Abarth kit.
Standar Sei's but with clubcento.gr logo's and orange ligthing in gauses.
Red/Black seats,not Blue/black.

Ise:
Sony r/cd

Exterior:
Full abarth kit.
Black stickers insted blue.
 
Back
Top