Technical Multipla Alloy Wheels
- Thread starter 54 Silver Multipla
- Start date
Currently reading:
Technical Multipla Alloy Wheels
Just posted 'for sale' in the CLASSIFIED section a set of the 'new shape' multipla alloys if anyone is interested?
Really good value for money at only £180.00
Cheers
oooooh tempting!!
Last edited:
57mmStroke
New member
- Joined
- Feb 5, 2008
- Messages
- 45
- Points
- 21
Alloys only? or as seen in pictures with tyres?
If so, are the tyres still good?
by the way, how does the multi perform with 155bhp? how is the fuel consumption? (I assume it is a diesel am i right?)
Thanks!
If so, are the tyres still good?
by the way, how does the multi perform with 155bhp? how is the fuel consumption? (I assume it is a diesel am i right?)
Thanks!
As in picture, there is a full breakdown (with further pictures) in the classifieds section.
Two as new tyres (200 miles), two with many thousands of miles left on them.
The multi performs well with 155, no problems with clutch judder and it really is like a new car to drive, excellent performance in 2, 3, 4 & 5, it has masses of pick up. 0-60, I don't know, not really bothered about this aspect, but it does go....
You assume right, it is a diesel.
Cheers
Two as new tyres (200 miles), two with many thousands of miles left on them.
The multi performs well with 155, no problems with clutch judder and it really is like a new car to drive, excellent performance in 2, 3, 4 & 5, it has masses of pick up. 0-60, I don't know, not really bothered about this aspect, but it does go....
You assume right, it is a diesel.
Cheers
FiatFleetFamily
Established member
Hi
What is the offset measurement on the 16" alloys from a stilo and what size of tyre have you fitted, as I just put a post up about this, would love to know.
What is the offset measurement on the 16" alloys from a stilo and what size of tyre have you fitted, as I just put a post up about this, would love to know.
Do you know what, I do not know what the exact offset is. It does fall within the range though see > http://www.alloyguide.com/Fiat.php
The front wheels fitted fine, no touching under load and from lock to lock.
The rear wheels were a problem when fitting as the inside of the tyre rubbed against the inner wheel arch lining (against the inner body). I had to remove the wheels and remodify these parts on both sides by cutting a new shape and making new fixing points to the body under the wheel arch.
Once this was done, all OK!
The tyre size was 205/55/R16 91V rating (the engines chipped) £260,00 for 4
Hope this helps!
Last edited:
