Erm... title pretty much sums it up really... I'm stumped! :bang:
Technical MPI Sei MAP sensor - where on earth is it?
- Thread starter ronnieronson
- Start date
Currently reading:
Technical MPI Sei MAP sensor - where on earth is it?
cant you just follow the vacuum lines?
OP
OP
I could.... but I don't know what to follow
Go easy on me custard - I'm still learning this diy mechanic lark
Last edited:
well you know where the map was on the SPI cento and the pipes that went to the TB.
should be similar on the mpi??
bear in mind ive never seen an mpi so im guessing here
infact post a pic up with no airfilter the next time you have the housing off and i'll add it to the engine type FAQs as i only have a stock photo
should be similar on the mpi??
bear in mind ive never seen an mpi so im guessing here
infact post a pic up with no airfilter the next time you have the housing off and i'll add it to the engine type FAQs as i only have a stock photo
OP
OP
well you know where the map was on the SPI cento and the pipes that went to the TB.
should be similar on the mpi??
bear in mind ive never seen an mpi so im guessing here
infact post a pic up with no airfilter the next time you have the housing off and i'll add it to the engine type FAQs as i only have a stock photo
Sorry - not a great pic I know, but it's the only thing close at the moment...
The MAP on the spi is near the ecu isn't it?
on the spi its near the ECU pretty much straight above the brake servo/MS
OP
OP
Didn't me and Kris answer this a while back? On the MPI I'm pretty sure it's on the inlet manifold , R/H side looking from the front of the car, just to the right of the throttle quadrant thingy and slightly below it.
OP
OP
Sorry Fingers, can you dumb that down for me a bit - passenger side of the engine yes? Inlet manifold???? Throttle quadrant thingy??????
I'm lost
- Joined
- Nov 30, 2005
- Messages
- 2,181
- Points
- 365
Knew this would come in handy
https://www.fiatforum.com/cinq-sei-technical/101249-components-56k-unfriendly.html
On the left I believe, can just see the plug socket.
https://www.fiatforum.com/cinq-sei-technical/101249-components-56k-unfriendly.html
On the left I believe, can just see the plug socket.
Last edited:
OP
OP
this bit?
- Joined
- Nov 30, 2005
- Messages
- 2,181
- Points
- 365
yezzir
OP
OP
- Joined
- Feb 16, 2005
- Messages
- 5,983
- Points
- 988
Yep, I told you that before
Its a combined MAP and air temperature combined into one unit
Kristian
Its a combined MAP and air temperature combined into one unit
Kristian
OP
OP
Yep, I told you that before
Its a combined MAP and air temperature combined into one unit
Kristian
doh!
...I have a crap memory, and tend to forget things when I get stressed about them
OP
OP
Yep, I told you that before
Its a combined MAP and air temperature combined into one unit
Kristian
Ok - gonna hopefully get round to this at the weekend, where does the wiring trace to from that connector? - what sort of item am I looking for?
*Help*
- Joined
- Feb 16, 2005
- Messages
- 5,983
- Points
- 988
What do you mean, where do the wires go from the connector? THey run into the loom at teh rear of the engine, then directly to the ecu connector.
I have a pin out for the connector as well, but am off out now and not back till late. If you need the pin out i'll dig it out soon.
Kristian
I have a pin out for the connector as well, but am off out now and not back till late. If you need the pin out i'll dig it out soon.
Kristian
OP
OP
ralphtown
New member
Would like to add,what a great series of pics and useful info.
not the usual unhelpful comments here.
Now I know where the MAP is on my MS edition,I,ll be taking it off and giving it a jolly good dose of carby cleaner to see if it helps with my lack of power in intermediate gears...fine in 5th tho.
Nice one chaps.
RALPH.
not the usual unhelpful comments here.
Now I know where the MAP is on my MS edition,I,ll be taking it off and giving it a jolly good dose of carby cleaner to see if it helps with my lack of power in intermediate gears...fine in 5th tho.
Nice one chaps.
RALPH.
ralphtown
New member
After looking at the link,I think that should become a "sticky" for MPi owner referance.Even found out where the ECU temp sensor is too....FANTASTIC!!
EBAY!!! Here I come.
Unless someone already knows a good cheap source for MAP and ECU temp sensor parts for MPi engines
You,ve made my day.
RALPH.
EBAY!!! Here I come.
Unless someone already knows a good cheap source for MAP and ECU temp sensor parts for MPi engines
You,ve made my day.
RALPH.
