considering getting mk1 punto gt alloys putting abarth centres and sticking them on my mk2 punto with coilovers anyone ever done this and do you think it would look good
Styling Mk1 punto gt alloys on a mk2 punto
- Thread starter petethepirate
- Start date
Currently reading:
Styling Mk1 punto gt alloys on a mk2 punto
- Joined
- Apr 8, 2008
- Messages
- 16,742
- Points
- 3,187
make sure the alloys aren't 13"
As the punto has 14" steelies and 15" alloys
Abarth Caps - Ebay
As for fitting - i BELIEVE they are the same 98x4pcd and 58.1mm center bore
dont hold me to that tho
Ziggy
As the punto has 14" steelies and 15" alloys
Abarth Caps - Ebay
As for fitting - i BELIEVE they are the same 98x4pcd and 58.1mm center bore
dont hold me to that tho
Ziggy
Mk1 GT alloys are 14" and do have 4x98PCD and 58.1mm centre bore, not sure on the offset but they'll defnitely fit straight on - you just might need spacers to keep them off the calipers.
yes i done this and had coilovers down 120mm and it scrubbed with wheel spacers and was fine without
OP
OP
do you have any pics of the car with the wheels and coilovers cheers
