K
Kristian
Guest
Hello everyone.
I don't have a wiring diagram for a mk2 1.2 16v engine so here is my problem.
I have a bravo 1.2 16v mk2 engine that I'm putting in my Seicento. I am retaining the original ECU. This is the engine with the cam sensor.
My ecu is wired for the mk1 coil packs (two packs, 2 connectors (both with two wires each))
The coil pack on the mk2 has 1 connector and 3 wires.
I can't simply swap my current packs over to the eninge (differnt mounting plate) and I bought some magnecore leads that only fit the single lead coil pack.
Does anyone know how this coil pack works and if i can retrofit it to my loom (similar to putting the mk2 coil pack onto the mk1)
The mk1 mk1 is wasted spark, is the mk2 as well?
Does anyone have a mk2 schematic?
Cheers for any help and advice
Kristian
I don't have a wiring diagram for a mk2 1.2 16v engine so here is my problem.
I have a bravo 1.2 16v mk2 engine that I'm putting in my Seicento. I am retaining the original ECU. This is the engine with the cam sensor.
My ecu is wired for the mk1 coil packs (two packs, 2 connectors (both with two wires each))
The coil pack on the mk2 has 1 connector and 3 wires.
I can't simply swap my current packs over to the eninge (differnt mounting plate) and I bought some magnecore leads that only fit the single lead coil pack.
Does anyone know how this coil pack works and if i can retrofit it to my loom (similar to putting the mk2 coil pack onto the mk1)
The mk1 mk1 is wasted spark, is the mk2 as well?
Does anyone have a mk2 schematic?
Cheers for any help and advice
Kristian