Technical Left Dipped beam issue

[Kermit Von Henderson]

Hi,

Hoping someone might be able to help.

Hit a snag with my 2017 Doblo. The left dipped beam started to flicker on and off and now it's totally dead. All other lights work fine.

I'm not getting 12v coming out of the BCM. If I put 12v to the connector the headlight works fine so all wiring from dash to light is a ok.

Right dipped output pin on BCM goes between 3 and 12v when turning on. The left just stays at 3v.

Does anyone know if the 2 dipped beams have separate relays on the BCM? I can't find a proper diagram anywhere for this year.

Secondly I assume the stalk switch is a single switch and doesn't have 2 outputs for left and right.

I can only guess it's a relay on the board but cannot figure out which one and it's driving me mad.

Any help much appreciated.

 

[the green vanper]

Hello,

Is it the 360/361 model?

 

[Kermit Von Henderson]

Hello,

Is it the 360/361 model?

Hi,

It's a 263 2017 mk2

It's a cargo maxi

 

[the green vanper]

I don't see the 263 on the models list. And only got access to the documentation of this model:

The others give some kind of error. So I'm afraid I won't be able to help

 

[Kermit Von Henderson]

I don't see the 263 on the models list. And only got access to the documentation of this model:

View attachment 453929

The others give some kind of error. So I'm afraid I won't be able to help

Thanks anyway. Yeah I can't find a full diagram of the board or wiring for the 263.