To start of: sorry, I know this has been asked plenty of times before but I need help, so here we go:
My 2003 4x4 drivetrain which ran perfectly fine when I started my restoration now, upon its being reinstalled, wont start. I’ve narrowed the problem down to the fuel pump not activating on its own (I’ve checked by powering it straight and it does function).
So my thoughts went to the lit error light on my dashboard with an image of a key and the word: ‘code’. After substantial research I concluded that this could be the root of my problems.
My questions are:
1) how do I fix this (on a limited budget if possible)?
2) why/how did this happen as it worked before starting my restoration?
(I attached things I thought might be helpful with answering my questions)
My 2003 4x4 drivetrain which ran perfectly fine when I started my restoration now, upon its being reinstalled, wont start. I’ve narrowed the problem down to the fuel pump not activating on its own (I’ve checked by powering it straight and it does function).
So my thoughts went to the lit error light on my dashboard with an image of a key and the word: ‘code’. After substantial research I concluded that this could be the root of my problems.
My questions are:
1) how do I fix this (on a limited budget if possible)?
2) why/how did this happen as it worked before starting my restoration?
(I attached things I thought might be helpful with answering my questions)