General I wonder what happens when.... (IOTY nomination)

[Most Easterly Pandas]

.....an engine mount has snapped, and you remove the only thing keeping the engine from falling out of the bottom

CRASH, the engine falls to the floor :bang:

Remind me never to remove the throttle body from the engine of a smashed up Panda when the TB is slightly imbedded in the bulk head and holding the engine in the air

Also cut my finger

And found a hole in the gearbox

As the hole is only in the cast, they gearbox should go again shouldn't it

Jon.

 

[PandaMark]

Clean fingernails for someone with their hands in an engine bay!
Do you wear gloves?

 

[Most Easterly Pandas]

Clean fingernails for someone with their hands in an engine bay!
Do you wear gloves?

Funny enough, when uploading pic I though Look cleaner than they did when I cut my finger.

Nope, don't wear gloves, just been washed before putting plaster on cut finger

Although I do keep a bucket of water by the side of the car to regularly rinse hands in to stop them getting to grubby (first time I've done it and it seems to work well ).

 

[udtrev]

Your nomination is duly added - do you intend to let anyone else stand a chance for the title ?

http://forums.bauchan.org/4x4/topic.php?pid=10199#p10199


Trev

 

[John H]

found a hole in the gearbox


As the hole is only in the cast, they gearbox should go again shouldn't it

Jon.

The mice around your way have stronger teeth than the ones here.

And yes, the gearbox may well be OK if that part of the casting is the only damage.

 

[Most Easterly Pandas]

The mice around your way have stronger teeth than the ones here.

And yes, the gearbox may well be OK if that part of the casting is the only damage.

Lol. Many thanks. Shall be inspecting the gearbox properly when removed. If nothing else I'll strip it for bits if it's no good whole. Will be doing the same with engine (stripping for bits) as thats compleatly US'ed. Fly wheel bent and sheared engine mount.

Jon.

 

[CLXCraig]

Jon, Which panda is this happening to? the 750?

 

[Most Easterly Pandas]

Jon, Which panda is this happening to? the 750?

The smashed Selecta.

I managed to almost completly strip the engine wiring loom out of it yesterday. Just got to take it though bulk head.

Should have car in a stripped state ready for engine and gearbox removal by the end of the day. Engine bay looks a bit different now it's been stripped a fair bit.

Surprising what you can do to bent body work with a crow bar also

 

[nitro_warrior]

Yeah the gearbox should be fine. You might want to glue a wee patch over it to stop oil and any other crap leaking in to it.

 

[Most Easterly Pandas]

Yeah the gearbox should be fine. You might want to glue a wee patch over it to stop oil and any other crap leaking in to it.

Ta. The bit thats snapped in inside. So when I split box and engine I'll get it out and can stick it into place.

 

[udtrev]

Just drifting slightly off topic for a mo,

Jon,

Have you seen the new IOTY nominations from the surf mob yet ? If you want some light relief you will like them


Trev