HT leads help please

[ACID]

ok i was gogin to do a compression test
as i took out each ht lead to get to the spark plug, leads 2 and 3 seem to be broken and therefore the bottom casing is caught in the hole
i cannot reach the spark plug as the casing is stuck over it

therefore my ratchet cannot get the spark plug out

any advice what i can do>>

 

[Anonymous]

do you mean the ends of the sparkplug leads? Try long nosed pliers to pull em off. If not, a fine chisel or even a screwdriver to, break em off until you can get the socket on. Remove any broken bits before taking the plug out. can use an air line if you have access to one but bits must be removed or they will drop into the hole when plug is taken out