Help

[Gayle 3]

I have a 58 plate panda, engine management light came on said coil pack b, changed both coil packs ht leads,spark plugs knock sensors and ecu. Engine management light still comes on and car cuts out when driving spent a fortune please if anyone can help id be appreciated

 

[rmjbn1]

Hi and welcome
Do you have the exact Diagnostic Trouble Code?

Does it only cut out when up to temperature and running? Or fail to start?

 

[Gayle 3]

Hi and welcome
Do you have the exact Diagnostic Trouble Code?

Does it only cut out when up to temperature and running? Or fail to start?

Its been to 2 different garages and still not sorted, it's when up to temperature starts perfect

 

[rmjbn1]

Which engine?

 

[Gayle 3]

Which engine?

1108 engine

 

[Gayle 3]

1108 engine

Mk2 169-2Q
Engine code 187a1.000
Fiat panda active

 

[Mike1alike]

I have a 58 plate panda, engine management light came on said coil pack b, changed both coil packs ht leads,spark plugs knock sensors and ecu. Engine management light still comes on and car cuts out when driving spent a fortune please if anyone can help id be appreciated

So only wiring it's left untouched. Check wiring between ECU and coil packs.

 

[Gayle 3]

So only wiring it's left untouched. Check wiring between ECU and coil packs

 

[Gayle 3]

My partner will check tomorrow, surely the garage should have checked

 

[rmjbn1]

There is a known ECU wiring issue on the 1.1, typically causes cutting out over bumps, I'll see if I can find a helpful thread...

 

[Gayle 3]

Thank you so much i really appreciate help everything only changed 2months ago dnt want to scrap the car if I can help it

 

[rmjbn1]

I've read reports on here of people confirming the fault by waggling the wires that go to the ECU, but be very gentle, don't want to snap anything

Fix seems to involve supporting the wiring loom so the weight is taken off the connectors

This owner solved it with a wooden spoon:

Panda eco 1.1 2010 misfire The FIX ! | FIAT Panda (Mk3)

Hi, newbie so apologise if I don't post this collectively :confused:. Have been following this thread for some time and have replaced everything mentioned ( new coils, plugs, leads, good quality). Have moved all the wires, plugs, connections in the ECU area and the y inter connection in the...

www.fiatforum.com