Tuning help needed asap

[animal91]

i have got a seicento 1.1 sporting single point injection

now big question is it possible to convert to multi point injection as i have brought a punto 1.2 16v sport to take engine out of and fit in to it.

know engine is a straight fit but what else will i need to transfer know going to need ecu but what else ie loom etc etc

all help very much apprieciated

this is a running project but my run around to but its not fast enough now.

 

[clock34]

loooadas of info in the faq and search.

basicly,
1.2 16v engine
1.2 16 inlett and throttle body
seicento alternator
custom drivers engine mount (grind old one)
depending on pas/non pas a new pulley for alternator and mabee even a new braket to hold te tdc sensor correct
custom induction
D4 adapter re wiring to match the seicento loom to the punto loom
code box/key or a decoded ecu
and good luck

 

[ycming]

Just use the pulley from the punto engine and alternator from the cinq, and put spacers to spacer out the alternator to line up with the pulley.

This will saves you messing about with the TDC sensor.

Ming

 

[fingers99]

You might be better just going Megasquirt.

 

[clock34]

you can doo all the aove for about 60-80 quid if you use scrap yard parts. cheaper than megasquirt. although the squirt is better futureproofing.