HELP (Arbarth Spoiler)

[smoeseph]

I dont pretend to know anything about cars, the one ive got now is my first project.
Ive just brought an Arbarth spoiler and have no clue how to kit it, it looks asif its been glued on before. I placed it on to see if it fit properly and it dosent seem to. Ive got a 1.6 but thought all bravos where the same shape anyway, so can anyone help, thanks, smoe

 

[Rich]

AFAIK, the arse ends are all the same.

TigerSeal is good to glue them on with, at a guess i would say the spoiler is out of shape slightly from being removed from the other car..

 

[Anonymous]

where you from smoeseph?

 

[smoeseph]

im from dudley, west mids

 

[callum]

Find your local body shop and they will fit it for you.
it will need to be sealed on with tiger seal or something similar.

i had mine done on my 1.6 bravo at vidak motor bodies in nuneaton (west mids).

good luck, and post us some pics up when its on.

 

[Anonymous]

tiger seal, masking tape and about 15mins of your time.

scrub all **** off from the boot lid area then on the back of the spoiler there is like a little lip cover all that in tiger sealand push that flat on the windo at the top where it looks lined up while its on there and looking straight mask it on in place. but make sure its dead level cos one tiger seal is set,it really is set. if there is any prots of tiger seal around after if it wont pick off get soem wd40 on a rag and rub them hard.

 

[smoeseph]

sound cheers for your help lads!!

 

[Anonymous]

smoeseph where in dudley are you? im to from dudley,

 

[stephen01]

that was me!

 

[smoeseph]

well im from brierley hill, just by the flats. where bouts you from??