Hi all could anyone tell me if they no what is wrong with my heater when switched to either number 1 or 2 it dont work but when switched up to 3 or 4 it does work. It was working fine before for the past 3 weeks i have had the car. I done some hoovering in the footwells today and it was after that i noticed the issue. I read somewhere on here about checking the connectors in the passenger footwell and i have done this but still not working so if anyone has any ideas on how to fix this i would be greatful for the help
Punto (Mk2/2b) heater issue
- Thread starter kaneouno
- Start date
Currently reading:
Punto (Mk2/2b) heater issue
Hi,
it does sound like a connection / supply issue,
either the wiring itself - or the resistor pack , that SLOWS the fan motor on 1 + 2,
SEARCH on here works well ..!!
it does sound like a connection / supply issue,
either the wiring itself - or the resistor pack , that SLOWS the fan motor on 1 + 2,
SEARCH on here works well ..!!
- Joined
- Apr 8, 2008
- Messages
- 16,742
- Points
- 3,382
Put fan on 1 tap around switch / push switch firmly but not stupid hard
Does it come to life? Looks like switch
Since puntos are prone to coil packs failing altogether rather than allowing 1 speed id put that to a side atm
But it may still be the wiring thats at fault so wiggle the resistor pack wire
Ziggy
Does it come to life? Looks like switch
Since puntos are prone to coil packs failing altogether rather than allowing 1 speed id put that to a side atm
But it may still be the wiring thats at fault so wiggle the resistor pack wire
Ziggy
