General Head lights

[jackwhoo]

Right still stuck. So passenger side all bulbs work.
Drivers side when it's on low beam it seems to go to high beam. Then when I flash nothing happens. But when it's just side lights the high beam works. Somebody please help me out

Hi, Please stop starting a new thread every time you post on forum about your headlight problem.
Please do add to the thread you have already started re: headlights.
You will get more help doing so.
Thanks

 

[ben]

Hi, Please stop starting a new thread every time you post on forum about your headlight problem.
Please do add to the thread you have already started re: headlights.
You will get more help doing so.
Thanks

Merged

 

[jackwhoo]

Right still stuck. So passenger side all bulbs work.
Drivers side when it's on low beam it seems to go to high beam. Then when I flash nothing happens. But when it's just side lights the high beam works. Somebody please help me out

It sounds very much like there is a fault with the ground (-ve) connectors or wires to the driver side headlight.

 

[Paulemmett1975]

It sounds very much like there is a fault with the ground (-ve) connectors or wires to the driver side headlight.

Thank you at least I'm getting closer. Do you know best way to check this

 

[jackwhoo]

Do you have a volt meter? For dc volts?

 

[Paulemmett1975]

Do you have a volt meter? For dc volts?

Yes

 

[jackwhoo]

0-20volt range dc
One lead to head lamp bulb -ve
Other lead to battery-ve post
Take a reading with low beam on
Take a reading reading full beam on
Take a reading headlight Flash position

 

[jackwhoo]

Yes battery negative post
Yes bulb -ve wire
Yes with bulb fitted

 

[Paulemmett1975]

Hi thanks for all your input ,I have sorted the issue with the headlights.

 

[jackwhoo]

Hi thanks for all your input ,I have sorted the issue with the headlights.

Ha ha,
Go on.....tell us what the problem was and how you fixed it

 

[Paulemmett1975]

Ha ha,
Go on.....tell us what the problem was and how you fixed it

It ended up that the back of the loom connector had a smell nick in a cable which I couldn't see . My friend stripped everything down and we started again so now all working .