Technical Front Wheel bearings

[Nickkdx]

I’ve got a 2001 Fiat based Hymer motorhome on a 2.8 idtd heavy chassis, Q18.
I asked a garage a cost for changing these but they could because they couldn’t identify the bearings required despite me give ref & chassis number.
Anybody know what bearings are needed.
Cheers

 

[TamLin1]

Hi I've just fitted new front wheel bearings to my 2.8D Q18 and the bearings I've fitted are
Motaquip LVBW816
hope that's some help

 

[Nickkdx]

Hi I've just fitted new front wheel bearings to my 2.8D Q18 and the bearings I've fitted are
Motaquip LVBW816
hope that's some help

Thanks I will check them out, what year is yours.
Cheers

 

[TamLin1]

2001 2.8D maxi

 

[merovingian]

There appears to be a change of bearing from November 2001 so check out which month it was made with the VIN first.

I learned from bitter experience to go for quality ie SKF, as an old jewish friend used to say, buy cheap buy twice

 

[Nickkdx]

There appears to be a change of bearing from November 2001 so check out which month it was made with the VIN first.

I learned from bitter experience to go for quality ie SKF, as an old jewish friend used to say, buy cheap buy twice

Mine was registered March 2001.

 

[TamLin1]

mine was registered September 2001 so you should be safe enough.
if you want to go better quality you can cross reference the number.
I went for the motoquip because there was a huge price difference and I'm pretty sure they will see out the life of my van (its a bit of a heap)

 

[merovingian]

https://www.buycarparts.co.uk/skf/1362560

Looks to be right 18Q ie 1800 KG

 

[IceVovo]

I’ve got a 2001 Fiat based Hymer motorhome on a 2.8 idtd heavy chassis, Q18.
I asked a garage a cost for changing these but they could because they couldn’t identify the bearings required despite me give ref & chassis number.
Anybody know what bearings are needed.
Cheers

you could measure your outer cvjoint if you have calipers.
Should help eliminate wrong ones.