A
Alex
Guest
I've got a hole in the first silencer leaving the engine. It sounds horrific. Can I replace just this, or do I need a whole new exhaust?
Cheers!
Cheers!
Currently reading:
Front silencer replacement
A
Anonymous
Guest
is it the part with the flexi pipe on ?
see ebay linky
http://cgi.ebay.co.uk/FIAT-BRAVO-BRAVA-MAREA-1-6-EXHAUST-FLEXI-FRONT-PIPE-/280548552960?pt=UK_CarsParts_Vehicles_CarParts_SM#ht_1639wt_946
if its the front section they split,
see ebay linky
http://cgi.ebay.co.uk/FIAT-BRAVO-BRAVA-MAREA-1-6-EXHAUST-FLEXI-FRONT-PIPE-/280548552960?pt=UK_CarsParts_Vehicles_CarParts_SM#ht_1639wt_946
if its the front section they split,
This post contains affiliate links which may earn a commission at no additional cost to you.
OP
OP
Alex
Guest
Yeh, it is that bit. Is it hard to change or is it just a few bolts. And if I've got a 1.2 will this fit?
Thanks very much.
Thanks very much.
A
Anonymous
Guest
theres one here mate
clicky linky
http://cgi.ebay.co.uk/FIAT-BRAVO-1-2-80-98-EXHAUST-new-FRONT-DOWN-PIPE-70207-/250455257333?pt=UK_CarsParts_Vehicles_CarParts_SM#ht_1098wt_916
easy enough to change 20 -30min job
clicky linky
http://cgi.ebay.co.uk/FIAT-BRAVO-1-2-80-98-EXHAUST-new-FRONT-DOWN-PIPE-70207-/250455257333?pt=UK_CarsParts_Vehicles_CarParts_SM#ht_1098wt_916
easy enough to change 20 -30min job
This post contains affiliate links which may earn a commission at no additional cost to you.
OP
OP
Alex
Guest
I tried to see if I could find the hole today, and found out the flexi pipe is fine. Its where the pipe joins the manifold, it's just come off. The bolts and end plate are still connected but the pipe is just flapping around. Is it meant to come off or has it broken?
Ta
Ta
A
Anonymous
Guest
no mate idont think there supposed to come off
best bet is to:
find a garage that does welding and ask em to put a weld round it ,
best bet is to:
find a garage that does welding and ask em to put a weld round it ,