Hello all, sorry if i am asking old questions! I have just discovered my Multipla has worn bushes on the O/S/F lower wishbone due to scrubbing out a tyre, so i have ordered a replacement arm and a N/S/F as advised to do both and as i will be keeping the car for long time, i have also ordered A/R/BAR bushes as while doing the arms might just as well do them.
Finally the questions:-
1:- Where can i find the torque settings for the arm nuts & bolts?
2:- When i remove the old A/R/B bushes can anyone suggest what size nuts & bolts i should use and where to get them?
3:- I had new front springs replaced under an old warranty recall in Feb so 1 link bar was replaced and the other was checked and was ok, so do i need to check or replace anything else while i am doing the work?
Finally the questions:-
1:- Where can i find the torque settings for the arm nuts & bolts?
2:- When i remove the old A/R/B bushes can anyone suggest what size nuts & bolts i should use and where to get them?
3:- I had new front springs replaced under an old warranty recall in Feb so 1 link bar was replaced and the other was checked and was ok, so do i need to check or replace anything else while i am doing the work?