General front bumper fixing?
- Thread starter shelton
- Start date
Currently reading:
General front bumper fixing?
Your struggling to put the front bumper? How can you struggle it goes on the front 
Off the top of my head, having done it over 12 months ago, it's surprisingly straightforward. There's no special tricks or anything. You need the front light clusters out the way - they only get fitted once the bumper's on. The same with the front grille.
Basically if you line the bumper up with where you think it should go (this is made easier by the hole where the grille goes fitting around that metal frame), there are about 8 screws on the top. I remember that there are 2 either side of the metal frame, and there are 2 at either side that screw into a flimsy metal bracket (oone of mine was broken). There are 1 or 2 screws in between too. You need to pass the wores for the light clusters through the holes in the bumper before fixing it in place.
I don't remember how/if it attaches to the chassis at the bottom, because once you have the undertray on, there are about 12 screws holding it to that.
H
Basically if you line the bumper up with where you think it should go (this is made easier by the hole where the grille goes fitting around that metal frame), there are about 8 screws on the top. I remember that there are 2 either side of the metal frame, and there are 2 at either side that screw into a flimsy metal bracket (oone of mine was broken). There are 1 or 2 screws in between too. You need to pass the wores for the light clusters through the holes in the bumper before fixing it in place.
I don't remember how/if it attaches to the chassis at the bottom, because once you have the undertray on, there are about 12 screws holding it to that.
H
happy Birthday
