Mine has stone damage
Ordered a new one but how do I change it
Cheers,
Simon
Ordered a new one but how do I change it
Cheers,
Simon
Technical Front badge replacement?
- Thread starter Squadrone Rosso
- Start date
Currently reading:
Technical Front badge replacement?
Gently pull the bumper cover toward you and you will see the 8mm nut holding the front emblem on and the 10mm plastic nuts holding the bumper spears on. I have very large hands and forearms & I was able to remove these by hand. Note: place a towel between the bumper cover and your forearm to avoid scrapes/cuts.
The 8mm emblem nut needs a ratchet to break loose, but the 10mm plastic nuts can be removed with a 10mm socket and your fingers ( if you have strong fingers ). Be careful not to drop the socket or nuts down into the engine bay ( like I did ) or you will need to climb under the car, remove the fender liners and splash guard to find them.
not my text or photos or stupid shoes
The 8mm emblem nut needs a ratchet to break loose, but the 10mm plastic nuts can be removed with a 10mm socket and your fingers ( if you have strong fingers ). Be careful not to drop the socket or nuts down into the engine bay ( like I did ) or you will need to climb under the car, remove the fender liners and splash guard to find them.
not my text or photos or stupid shoes
OP
OP
Brilliant, thanks
OP
OP
Had a go at this today & failed miserably
No way can I get my hands down there.
So, any how to remove the front bumper guides please
Cheers,
No way can I get my hands down there.
So, any how to remove the front bumper guides please
Cheers,
OP
OP
Serious question:idea:
Anyone living near me willing to have a go at this for beer tokens, petrol money & gratitude
I'm 11 days past back surgery & have arthritis so after checking it out yesterday, there's know way I can do it
Thanks
Anyone living near me willing to have a go at this for beer tokens, petrol money & gratitude
I'm 11 days past back surgery & have arthritis so after checking it out yesterday, there's know way I can do it
Thanks
- Joined
- Apr 26, 2011
- Messages
- 2,102
- Points
- 358
If you're down in London again, I'll have a look at it if you want?
OP
OP
Thanks. I'll keep that in mind. Cheers
OP
OP
Big thanks to Grays Garage in Warwick today. Car was in for one of the climate control actuators to be changes so they fitted my badge free of charge too.
Car also returned properly valeted. Good stuff, very happy
Car also returned properly valeted. Good stuff, very happy
The Twins
Established member
- Joined
- Jan 19, 2013
- Messages
- 1,560
- Points
- 283
Big thanks to Grays Garage in Warwick today. Car was in for one of the climate control actuators to be changes so they fitted my badge free of charge too.
Car also returned properly valeted. Good stuff, very happy
Great stuff! Do you know if they used RUI's method?
OP
OP
I think they did it from underneath?
