Technical Fitting my aftermarket stereo

[AdamDynamic]

ANOTHER CLOSE UP OF NEW HEAD UNIT LEADS

 

[oldhammer]

Have you got a instruction book with H/u ?

it shouid have in there somewhere a list of the wires

and what each colour is for,

things like Amp remote/ electric antenna blah de blah
will need wiring out,

some radios are wired up for jap motors, hence confusion and mismatch
with vehicles,

 

[AdamDynamic]

Have you got a instruction book with H/u ?

it shouid have in there somewhere a list of the wires

and what each colour is for,

things like Amp remote/ electric antenna blah de blah
will need wiring out,

some radios are wired up for jap motors, hence confusion and mismatch
with vehicles,

I can't rotate this properly, sorry... but I think this what you mean??

 

[oldhammer]

icarnt work it out of pics too many wires in the way,

ithink pink wire on the H/u loom is the odd ball,

you shouid be able to work it out when you plug ebay iso into it
by looking at yellow /black and red
and tracing it back,

ignore speaker side this is ok on both iso leads,

 

[oldhammer]

3 wires mate,

see arrows ive marked on your instructions manual,

 

[oldhammer]

A3 phone
A5 blue/white
A6 Lights,

need disabling from loom,

dont chop them out from h/u lead side trace them back to ebay lead side and disable them there,
cutting out wires on H/u lead might leave any warranty on h/u void,

 

[oldhammer]

edit scratch the above,

ive worked it out,

blue and the orange wire,

work it out off diagram and see if its correct,

 

[AdamDynamic]

Ok... another picture here shows the Ebay lead plugged into the HU lead.... I have shown that the orange and blue wires, when followed go to an orange/White and an White/Blue on the HU lead.

The JVC Manual says the White/Blue is A5 REMOTE WIRE
The Orange/White is A6 Car light control switch

 

[AdamDynamic]

I am off to work for a few hours, so excuse me if I don't respond for a while

Thank you for your help again

 

[oldhammer]

yes thats correct mate,
thats what icame up with too,

now idont think them 2 wires are needed,and arnt any good
and will cause issues,

id chop them and insulate them,

but thats up too you,

 

[Ziggy122]

Blue is often remote wire often not used if no subwoofer. That shouldnt cause problems

Orange is for illumination based of headlights which punto dont use. Wont be owt on the car

Ziggy

 

[oldhammer]

Blue is often remote wire often not used if no subwoofer. That shouldnt cause problems

Orange is for illumination based of headlights which punto dont use. Wont be owt on the car

Ziggy

it does mate,

these plug and play ebay looms aint plug and play they is B/s

the feed from blue wire couid feed back on bcu,
orange (ilum) couid feed back on cars lighting,

have alook at the wiring diagram,

 

[s and b]

it does mate,

these plug and play ebay looms aint plug and play they is B/s

the feed from blue wire couid feed back on bcu,
orange (ilum) couid feed back on cars lighting,

have alook at the wiring diagram,

i told the seller on ebay this
he sells more than anyone
he ignored me
thats why i did the sticky in place of the other sticky for mk2 punto as wiring is different on earlier car looms

 

[oldhammer]

you might have to loop the red and yellow wire,
(switch radio off remove faceplate jobbie)

see this pic, this is loom set up for mk2b,

 

[oldhammer]

i told the seller on ebay this
he sells more than anyone
he ignored me
thats why i did the sticky in place of the other sticky for mk2 punto as wiring is different on earlier car looms

well they know everything dont they,

but will they pay out for customers burnt out Bcu and fizzled wiring

nah,

 

[s and b]

well they know everything dont they,

but will they pay out for customers burnt out Bcu and fizzled wiring

nah,

letter before action