Technical Fiat Stilo Abarth 2.4 HT Leads? (Eurocarparts)

[wac84]

I have purchased some new Bosch spark plugs from eurocarparts, but can not find any ht leads on there website. Am I missing something here, can somebody provide a link to the leads I need for my Abarth?

Chris

 

[Peter Pick-Up]

Welcome at FiatForum.

Have a look at ePER on top of this page for the leads.
Probably the 5 cil. has no HT leads, but anyway: best leads: www.magnecor.co.uk

 

[wac84]

Maybe that's why I can not find them, My Stilo Abarth is jerky until warmed up, and sometimes when hit hard, I get the engine warning beep. I think its either the spark plugs or a coil, the eper doesnt seem to be working properly at the moment.

So no leads I can not change, shall I just start with the spark plugs?

 

[Peter Pick-Up]

I suggest to buy your own ePER.
This is version 84, 2014, it's the latest version, as from 2015, Fiat is using another parts program, not available for the public.

https://www.ebay.co.uk/itm/FIAT-EPE...791195?hash=item25d6d0b1db:g:rccAAOSwsXFZGs5k

Did you buy NGK plugs?

NGK BKR6EZ
or
BKR6EIX ( irridium, the best!)

Both gapped at 0.9mm.

https://www.ngkpartfinder.co.uk/car_commercial_extra.php?id=14350

 

[wac84]

Thank you for the links, ill order the eper today.

I got bosch platinum plugs, fitment detail says 0.9 gap, these be suitale for the car?

Chris

 

[Eklipze3k]

Just to confirm as well - there are no HT leads because the ignition coils connect directly to the plugs - https://www.shop4parts.co.uk/?name=...s=1217&term=Fiat_Stilo_2.4_20v_Ignition_Coils

 

[Peter Pick-Up]

Thank you for the links, ill order the eper today.

I got bosch platinum plugs, fitment detail says 0.9 gap, these be suitale for the car?

Chris

Bosch plugs are an excelent choise, been using them myself for many years with good results.
These days, NGK is Original Equipment for Fiat/Alfa though...
Be sure they match the NGK plugs mentioned earlier.

 

[Mytheroo]

Maybe that's why I can not find them, My Stilo Abarth is jerky until warmed up, and sometimes when hit hard, I get the engine warning beep. I think its either the spark plugs or a coil, the eper doesnt seem to be working properly at the moment.

So no leads I can not change, shall I just start with the spark plugs?

not sure if any good to you, but the test for coils is an oscilloscope and a clamp probe.

ScannerDanner is the go to place for instructions

https://www.youtube.com/user/ScannerDanner/videos