Hi all
I have fitted a Kenwood DNX5220BT to my 55 plate Croma. I am having issues getting power to the unit.
There appears to be a standard ISO wiring block currently going to a Blaupunkt head unit. There are four wires in what I would describe as the power side as follows the top row of pins are numbered 1 & 2:
pin 1 = pink/black (this is thin cable compared to others)
pin 3 = Pink/white (normal size)
pin 4 = Pink/Black (fat cable)
pin 8 = Black (fat cable)
all others are unused
The Kenwood Unit iso block as the following:
pin 4 = yellow - battery
pin 5 = blue/white - power control
pin 6 = orange/white - dimmer
pin 7 = red - ignition
pin 8 = black -earth (ground connection)
any know what should go where as currently i only get the security (is) light flashing in the top left corner and the unit wont switch on.
Ta...
I have fitted a Kenwood DNX5220BT to my 55 plate Croma. I am having issues getting power to the unit.
There appears to be a standard ISO wiring block currently going to a Blaupunkt head unit. There are four wires in what I would describe as the power side as follows the top row of pins are numbered 1 & 2:
pin 1 = pink/black (this is thin cable compared to others)
pin 3 = Pink/white (normal size)
pin 4 = Pink/Black (fat cable)
pin 8 = Black (fat cable)
all others are unused
The Kenwood Unit iso block as the following:
pin 4 = yellow - battery
pin 5 = blue/white - power control
pin 6 = orange/white - dimmer
pin 7 = red - ignition
pin 8 = black -earth (ground connection)
any know what should go where as currently i only get the security (is) light flashing in the top left corner and the unit wont switch on.
Ta...