Fascia help

Currently reading:
Fascia help

mubs

New member
Joined
Oct 23, 2007
Messages
6
Points
3
Hi there,

Basically i just installed my IDA X001 into the punto mk2, however the fascia i bought for the punto doesnt sit flush and basically looks odd since it only allows one side to be clipped in at any time.
Is there anywhere i can actually purchase an official fiat punto aftermarket fascia just to be sure that it will fit properly, or failing that does anybody know where i can purchase a good one?

if it matters the fiat is a 52 plate, 1.9 JTD :)

Thanks in advance
 
I take it that the one you bought is made by Autoleads? The Autoleads ones are a poor fit, but can be modded to make them fit properly.

Your best bet is to go to your local FIAT dealer and buy an official one. :)
 
the problem is that the fiat dealership near me has closed down, is there anywhere online i can try?
 
i dont have permision to access that page, well it says i dont anyway?
 
the problem with the autoleads ones are there are two clips which are supposed to clip the facia into place but they arent long enough. hold the facia in place and put in the cage of the radio and push out as many tabs as you can. the cage will hold it in place!
 
Back
Top