Hi,
I happen to own a Stilo 1.2 (2002). Over the two months I have owned it, there has been numerous calamities (I am not trying to badmouth Fiat, all cars have faults):
- Front left wheel hub threads gone
- After the service, ABS sensor gone (takes weeks to have the part...)
- Back left wheel brake binding (is little better after greasing the slide pins but still binding)
- 24 hours of "Bulb failure front" -warning - after that the car decided that they are fine and no more warnings.
And now - no central locking or power windows. 20 Amp fuse F32 blown -> I only had 15 Amp fuses, so replaced it with a 15 Amp fuse and it worked for a day, until it blew again.
Thought that correct rating would help and changed it to 20 Amp fuse. Worked fine while testing, after the night still worked great on the way to work and when I left at work -> blew the fuse again.
Has anyone come across this kind of problem before? If so, where might the problem be?
I have some experience in general electronics, and I have the eLearn manual (usability and user interface of it is ridiculous, by the way... )
I happen to own a Stilo 1.2 (2002). Over the two months I have owned it, there has been numerous calamities (I am not trying to badmouth Fiat, all cars have faults):
- Front left wheel hub threads gone
- After the service, ABS sensor gone (takes weeks to have the part...)
- Back left wheel brake binding (is little better after greasing the slide pins but still binding)
- 24 hours of "Bulb failure front" -warning - after that the car decided that they are fine and no more warnings.
And now - no central locking or power windows. 20 Amp fuse F32 blown -> I only had 15 Amp fuses, so replaced it with a 15 Amp fuse and it worked for a day, until it blew again.
Thought that correct rating would help and changed it to 20 Amp fuse. Worked fine while testing, after the night still worked great on the way to work and when I left at work -> blew the fuse again.
Has anyone come across this kind of problem before? If so, where might the problem be?
I have some experience in general electronics, and I have the eLearn manual (usability and user interface of it is ridiculous, by the way... )